Table Of Equivalences: Leds - Characters - Nodal Ninja Fanotec MECHA User Manual

MECHA User's Guide v.05.4
When MECHA is in AP or AP+STA, it broadcast a SSID with a specific name -
the default name contains the word "MECHA" in it - to which the
smartphone can be connected using a password, which is 12345678 by
default.
Once the smartphone is connected to MECHA SSID, the MECHA UI can be
accessed in browser at 192.168.8.1
When MECHA is in STA or AP+STA, it can also connect to the SSID of a
par�cular network, other than MECHA's own SSID, and as a result the User
Interface of MECHA can also be accessed at the address given in that
par�cular network, like this: 192.168.1.100
As a note, the par�cular network can be managed by the smartphone itself,
if on smartphone a hot-spot is enabled, and MECHA can connect to it (more
on that later).
If, for any reasons, the address of the MECHA UI cannot be known, MECHA
has a way to show the address of the UI, if one of these codes is entered
using MECHA's bu�ons:
[3][2][1]� will show on LEDs the last part of the UI address, like .100
[3][2][3]� will show on LEDs the full UI address, like 192.168.1.100
Table of equivalences: LEDs ‒ characters
The conven�ons of how the numbers and symbols are shown on LEDs are
featured in this table.
! . : 1 2 3 4 5 6 7 8 9 0 A B C D E F
Table of equivalences: LEDs ‒ characters
11
© 2020 FANOTEC