Table of Contents
Advertisement
The zLM makes possible this scenario: User calling to or cha�ng with
Support and tell:
U: "I want my MECHA to shoot a panorama 10 shots around, 3 rows, nadir
and zenith."
S: "Please press ⏻, then �, the right bu�on."
And MECHA will do just that.
This will be explained in more details in the dedicated zLM chapter.
Many tasks, both simple and complex, can be performed either using the UI
or the bu�ons.
About the UI
To access the UI of MECHA, a device with an Internet browser needs to be
used. The simplest and handy, really handy, will be a smartphone.
MECHA uses wireless connec�on, abbreviated Wi-Fi.
It can be set as AP (Access Point), or STA (Sta�on), or even both: AP+STA, as
well as no Wi-Fi, in which case the control is possible only by bu�ons.
The desired mode can be set as default in MECHA's configura�on page
(more on that later), or by a short press of a bu�on when MECHA expects
that, and that is when the LEDs blink alternately, like this:
lights).
Spli�ng lights ‒ set MECHA in AP, STA, AP+STA mode
MECHA User's Guide v.05.4
During this period:
• pressing [1] will set MECHA in
AP mode
• pressing [2] will set MECHA in
STA mode
• pressing [3] will set MECHA in
AP+STA mode
© 2020 FANOTEC
-=-=-=-=
(spli�ng
10
Advertisement
Table of Contents
