Check If Two Mechas Are Paired - Nodal Ninja Fanotec MECHA User Manual

MECHA User's Guide v.05.4 ‒ Dual Axis

Check if two MECHAs are paired

How do you know that two MECHA units are already paired?
If MECHA units are paired, you will no�ce - few seconds a�er both units are
powered up - one unit has the middle LED turned on (MECHA-H), and the
other has the two middle LEDs turned on (MECHA-V).
If a red LED is lit on MECHA-V, as shown above, this indicates that it is not
the same firmware version in both units, and it is recommended to update
the firmware.
Also, while the MECHA units are on, if you want to check if they are paired,
press the power bu�on, ⏻ of MECHA-H, then wait for 10 seconds, and the
LEDs should light up as men�oned above.
Assuming both MECHAs are mounted as shown in the image above, let's
see how to update the firmware, how to pair MECHA units, if they are not
paired, and how paired units work.
52
© 2020 FANOTEC