Dac Test Using The Ui - Nodal Ninja Fanotec MECHA User Manual

DAC test using the UI

For this test, we assume that the pairing method was zLM2.
Considering that both MECHA units are powered up and paired, to access
the MECHA web User Interface (UI) using a device:
• Open your device's Se�ngs app., turn on Use Wi-Fi, and in Wi-Fi net-
work list of the device tap the network (SSID): MECHA-H-DAC
Please refer to your device manual on how to connect to Wi-Fi. Here is a
web page with animated instruc�on for many
generic guide about
• Enter the password: 12345678
• A�er connec�ng to the network, you can access the web control inter-
face by typing 192.168.8.1 in the web browser address bar.
• MECHA will show the "What is new?" page.
Tap [Update] if there is a newer firmware than the current one
displayed at the top, if you want, and wait un�l all MECHA status
LEDs are off. The update may take several minutes.
In the update process MECHA may ask for a Wi-Fi network with
Internet access (like your Wi-Fi at home or office) and the password
to be able to download the firmware from Internet.
Please do not turn off MECHA while upda�ng!
!
• Tap the [Row] bu�on to go to Row page.
MECHA User's Guide v.05.4 ‒ Dual Axis
connec�ng to a Wi-Fi
© 2020 FANOTEC
smartphones. Here is a
Network.
60