Dac Test Using Mecha's Buttons; Dac Test Without Camera - 1312 Parked Position; Dac Test 1312 - Nodal Ninja Fanotec MECHA User Manual

DAC test using MECHA's bu�ons
A�er pairing, every �me the MECHAs are powered up, you will no�ce they
are connected as DAC (Dual Axis Combo). It's recommended to power up
the horizontal unit first, then power up the ver�cal unit.
DAC test without camera - 1312 parked posi�on

DAC Test 1312

With ver�cal rail on
shown in the image to the right, enter the
code 1312<, or the code 1312>, in MECHA-H,
using the bu�ons of MECHA-H.
This code tells the Combo to execute a panor-
ama to the le�, or to the right, made of 12
shots around, 3 rows at 0, +/- 45°, plus zenith
and nadir, star�ng from parked posi�on.
MECHA User's Guide v.05.4 ‒ Dual Axis
Wait un�l all LEDs are off, and perform the following
tests without camera mounted.
Please note that tests can be stopped by pressing
the power bu�on, ⏻, if necessary.
Use the MECHA-V le�/right bu�ons (which look like
up and down due to the moun�ng orienta�on) to
posi�on the ver�cal rail on parked, level, or raised
posi�on. You can press � then, quickly, [2] or �
then, quickly, [2] to rotate ver�cal MECHA by 90°.
To enter the codes below, use the numeric bu�ons
and le� bu�on, �, to enter <, and right bu�on, �,
to enter >.
parked posi�on, as
© 2020 FANOTEC
56