How To Unpair Mechas - Nodal Ninja Fanotec MECHA User Manual

How to unpair MECHAs

Temporary Unpairing
Power up MECHA-V and press MECHA-V bu�on [1] when LEDs show
spli�ng lights (- = - = - = -
off at this moment. The units remain unpaired un�l you power up the sys-
tem again.
Permanent Unpairing
While the units are temporarily unpaired, access the MECHA-H configura-
�on page, and select the op�on AP from the Default Mode list, then tap/
click [Apply] bu�on at the bo�om of the configura�on page.
Re-Pairing a�er Unpairing
Power up MECHA-V and press MECHA-V bu�on [2] when LEDs show
spli�ng lights (- = - = - = -
off at this moment. When both units are powered up, they will pair auto-
ma�cally.
If a pairing PIN is set
If a pairing PIN is set, and you want to permanently break the pairing, please
set a different PIN in MECHA-V.
MECHA User's Guide v.05.4
=). It does not ma�er whether MECHA-H is on or
=). It does not ma�er whether MECHA-H is on or
© 2020 FANOTEC
100