Table of Contents
Advertisement
Configura�on page
The Configura�on page can be accessed at 192.168.8.1/config, using the
following username and password:
User:
Password:
Default mode. The possible values for default mode are: AP, STA, AP+STA.
The default mode set here will be the current mode for MECHA a�er
powering up. However, the default mode can be changed by pressing one
of the MECHA's bu�ons at spli�ng lights, as follows:
Press MECHA's bu�on [3] - at spli�ng lights - to return the individual
se�ngs to the default values. Very useful if you have forgo�en the set
passwords and cannot access, for example, the configura�on page, or the
user interface. The default passwords are men�oned in this user guide.
The maximum value for Wi-Fi Power is 100. In our example (see the image
below), it is 25.
AP Mode SSID is the name of MECHA's ne�work. This is how it appears in
the list of available networks on your device.
SSID default password is 12345678.
Pairing PIN is a four-digit number that allows you to pair automa�cally at
start more than 2 MECHAs connected to the same network or to the same
hot-spot. See Pairing PIN for more than 2 MECHAs.
UI Password allows you to prevent someone from changing the se�ngs on
the Configura�on page. You may want to allow someone to access your
interface, but may not want the se�ngs to be changed.
MECHA User's Guide v.05.4 ‒ Single Axis
admin
Mecha
© 2020 FANOTEC
38
Advertisement
Table of Contents
