Mecha's Current Codes - Nodal Ninja Fanotec MECHA User Manual

MECHA's Current Codes

Power/Status
LED Indicator
MECHA's bu�ons allow you to quickly perform some opera�ons, and they
can be an alterna�ve to the web interface, in most cases.
MECHA has 5 LEDs which show you the result of the performed opera�on.
Pplease see the Table of equivalences: LEDs – characters at the beginning
of this guide.
Power up the device by pressing the power bu�on, ⏻, for a few seconds,
and enter the code you need, using MECHA's bu�ons.
See below the equivalence of bu�ons and characters:
1 2 3
1 2 3
For example, to enter the code
This code executes the preset 1 to the le�.
Any code ends with one of the signs > or <, which usually tells MECHA to
execute the preset to the right or to the le�.
See all standard current codes below.
101
MECHA User's Guide v.05.4
P r o g r a m m a b l e
Buttons
Left/Right
Buttons
○
< > 0
1<
, use the bu�ons
© 2020 FANOTEC
Power
Button
1
and .