Table of Contents
Advertisement
DAC Firmware update using the
smartphone
This update method is available star�ng with firmware version 02118.
For this simple method of upda�ng the firmware, we assume that you know
how to set up a hot-spot on your smartphone, and the MECHA units are
already paired.
• First, set up a hot-spot with the name
87654321.
• Power up the horizontal MECHA (hold down its power bu�on, ⏻, for 3
to 5 seconds).
• Then power up the ver�cal MECHA (hold down its power bu�on, ⏻, for
3 to 5 seconds).
• Wait un�l de spli�ng lights end:
using the bu�ons of horizontal MECHA, enter the code 312123<, which
will update the firmware of both units. The MECHA's response –
displayed on LEDs – can be: !!!, if Internet is not available for MECHA.
If Internet is availabe for MECHA, the update will be performed in a
maximum of 5 minutes. If you encounter problems while upda�ng the
firmware, please contact us by e-mail at mecha@nodalninja.com specifying
the id of the MECHA you're using.
In most cases, the problems encountered when upda�ng the firmware are
caused by the wrong Wi-Fi password. However, due to the nature of the
Internet, some�mes the update server cannot be reached, and this can be
inves�gated once we get in contact by e-mail.
NOTE. See the Table of equivalences: LEDs – characters.
53
MECHA User's Guide v.05.4 ‒ Dual Axis
-=-=-=-=
© 2020 FANOTEC
MECHA-UPDATE
and password
and you hear two beeps and,
Advertisement
Table of Contents
