Before first use
Before using MECHA, we recommend that you do specific checks and tests.
• First, if you have an R1, or an NN3, mount the R1 or the NN3 on MECHA
as shown in the images below:
Power up MECHA
• Power up MECHA pressing the power bu�on, ⏻, for 3 to 5 seconds. It
may take about 40 seconds to start.
Check the ba�ery level
◦
If no LED lights up, or only a
up, the ba�ery may be discharged, and it is
recommended to use a 5V-2A charger to
charge it. It may take 3 to 5 hours to charge
the ba�ery.
◦
Otherwise, a�er 30-40 seconds, you will
hear two beeps, and the LEDs below the
ba�ery symbol will turn off.
15
MECHA User's Guide v.05.4 ‒ Single Axis
red
© 2020 FANOTEC
LED lights