Panorama With Camera Mounted; Panorama With Automatic Shooting Pattern Using Only The Mecha's Buttons; Panorama With Automatic Shooting Pattern For Dac - Nodal Ninja Fanotec MECHA User Manual

MECHA User's Guide v.05.4 ‒ Dual Axis
Panorama with camera
mounted
If the above DAC tests are successful,
you can repeat each test with
camera mounted.
Mount the camera on the upper rail,
using the camera moun�ng knob,
and plug in the Camera Port (CAM) a
specific shu�er cable for the camera
in use. This allows the triggering of
the shu�er automa�cally.
The units being paired, the camera
can be connected to any of them.
Use the test codes men�oned above
whenever you want to quickly shoot
this type of panorama without using
the User Interface.
Panorama with automa�c shoo�ng pa�ern using
only the MECHA's bu�ons
Panorama with automa�c shoo�ng pa�ern for DAC
This method requires firmware version 02118, or newer, and works for
rec�linear lens from 10 to 200 mm (FF equiv).
The shoo�ng pa�ern will be computed by MECHA based only on few
presses of a bu�on without using the User Interface, as follows:
• First, posi�on the ver�cal rail on LEVEL posi�on using the le�/right
bu�ons of MECHA-V.
58
© 2020 FANOTEC