Set Communication - ADF Web EnOcean User Manual

Industrial Electronic Devices

SET COMMUNICATION:

By Pressing the "Set Communication" button from the main window for SW67C75 (Fig. 2)
the window "Set Communication" appears (Fig. 3).
The means of the fields for "PROFIBUS" are:
In the field "ID Device" the ID for the PROFIBUS side is defined;
In the field "Buadrate" the data rate of PROFIBUS is defined (fixed to "Auto
Baudrate");
In the field "Number Byte
In the field "Number Byte
The means of the fields for "Ethernet" are:
In the field "IP Address" the IP address of the converter is defined;
In the field "SubNet Mask" the SubNet Mask of the converter is defined;
In the field "Gateway" the default gateway of the net is defined. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out
of the net;
In the field "DNS" the IP Address of the DNS server is defined.
ADFweb.com S.r.l.
In" the number of input byte of PROFIBUS is defined;
Out" the number of output byte of PROFIBUS is defined.
User Manual EnOcean / PROFIBUS Slave
Document code: MN67C75_ENG Revision 1.000
Figure 3: "Set Communication" window
Page 16 of 25