File Gsd - ADF Web EnOcean User Manual

Industrial Electronic Devices
By clicking on "+" or "Modify", it is possible to add/modify a new variable for the selected ID. The window "Add/Modify EnOcean variable"
appears (Fig. 6).
The means of the EEP fields are:
In the field "Rorg" the type of EnOcean telegram is defined;
In the field "Func" the type of EnOcean instance is defined;
In the field "Type" the type of event is defined.
The means of the Variable fields are:
In the field "Case" the format of the EnOcean telegram is defined;
In the field "Variable" the variable to read/write is defined;
In the field "Position" the starting byte of the internal array where
mapping/taking the variable is defined;
In the field "Bit Start" the starting bit of the defined Position where
mapping/taking the variable is defined.
GSD FILE:
By pressing the "GSD File" button it is possible to save the GSD file for the PROFIBUS side.
With this feature you can save the configuration of the gateway of the PROFIBUS side.
Note:
When you import the .gsd file on your Master PROFIBUS you have to add all the modules that are present inside it.
ADFweb.com S.r.l.
User Manual EnOcean / PROFIBUS Slave
Document code: MN67C75_ENG Revision 1.000
Figure 6: "Add/Modify EnOcean variable"
window
Page 19 of 25