National Instruments NI DIDS-2103 User Manual page 91

Init_AIX_Filt
Tip Strip: Re-intialize filter to change break frequency
Detail: When pressed, reinitializes the 2
changing AIX_FilterBreak.
AIX_FilterBreak
Tip Strip: Filter cutoff frequency
Units: Hz
Detail: Lowpass cutoff frequency of a 2
SimEnable_AIX
Tip Strip: Enable simulation of this parameter in engineering units
Detail: When TRUE, passes the
This is useful for tuning PID control gains when
Sim_AIX
Tip Strip: Simulation value
Units: Same as AIX_Units
Detail: The value, in engineering units, that is simulated when
nd
order filter on AIX_Raw. The filter should be reinitialized when
nd
order filter on raw voltage.
Sim_AIX directly to AIX, bypassing the filter and conversion lookup table.
AIX is being used for feedback control.
SimEnable_AIX is ENABLED.
NI DIDS-2100 Series User Manual | © National Instruments | 91