National Instruments NI DIDS-2103 User Manual page 162

RailP
Tip Strip: Rail pressure in bar
Units: bar
Detail: Rail pressure used as feedback to the PID controller. The analog channel utilized for pressure
feedback is selected via RailP_Channel. The analog channel must be converted to units of bar via the
Analog Input Setup window.
RailP_ControlMode
Tip Strip: Selects the IMV or HPV as controlled by PID
Detail: Selects between IMV PID Mode or HPV PID Mode. When in IMV PID Mode, the HPV PID control
parameters will be disabled (grayed out) and the HPV will be controlled by a constant duty cycle and
frequency. When in HPV PID Mode, the IMV PID control parameters will be disabled (grayed out) and the
IMV will be controlled by a constant duty cycle and frequency.
Clear RailP Fault
Tip Strip: Clears faults related to rail pressure control
Detail: Clears RailP_Fault
RPC Plot
Tip Strip: Opens a plot window of RailP_Setpoint, RailP,
162 | ni.com | NI DIDS-2100 Series User Manual
after the fault has been resolved.
IMV_DC and HPV_DC.