National Instruments NI DIDS-2103 User Manual page 178

Undefined Trigger Behavior
Tip Strip: Determines behavior when no trigger is present
Detail: Selects the behavior of the operating points function while an operating point is not defined during
Trigger Mode. This parameter is not applicable to
Hold Current OP: Do not do anything, but remain in the current operating point until one of the
Wildcards is satisfied.
Goto Error State: Change operating point to the point specified by
Multiple Trigger Behavior
Tip Strip: Determines behavior when multiple triggers are present
Detail: Selects the behavior of the operating points function while there are multiple operating points satisfied
by the Trigger Wildcards. This parameter is not applicable to
Highest Takes Priority: Change operating point to the point which has the highest operating point number
(index).
Goto Error State: Change operating point to the point specified by
Multiple Trigger Error
Tip Strip: Indicates multiple triggers are present
Detail: When in
multiple simultaneous triggers have been encountered and the error state will be executed.
Undefined Trigger Error
Tip Strip: Indicates no trigger is defined for selected
Detail: When in
Wildcards, and the error state will be executed.
Time/Wildcard Error
Tip Strip: Invalid entry for an operating point time value
Tip Strip: Invalid entry for a wildcard
178 | ni.com | NI DIDS-2100 Series User Manual
Trigger Mode, and Multiple Trigger Behavior
Trigger Mode, indicates when no trigger condition is satisfied by the specified
Timer Mode.
Error
Timer Mode.
Error
is set to Goto Error State, indicates when
process variables
OP.
OP.
Trigger
Trigger