National Instruments NI DIDS-2103 User Manual page 104

Average Duration
Detail: Displays the average duration of the injection commands for all three channels.
SkipFire_DI1_ChnX
Tip Strip: Enables Skip Fire on DI channel when EPT Mode is selected
Detail: Enables the skip fire sequence defined by
DI channels. Also manipulate and are manipulated by the corresponding
DI-EPT Pulse Generation
SkipFire_Cycles
Tip Strip: Specifies the period length, in number of cycles, for the skip fire sequence in EPT Mode (Min = 1).
Detail: Specifies the number of cycles included in a skip fire sequence when the DI injector is operated in
EPT mode. For example, if the number 7 is entered, the DI injector will continuously repeat a seven cycle
sequence as long as
manipulated by the corresponding
other DIX Advanced Settings
SkipFire_OnCycle
Tip Strip: Specifies the number of active cycles during skip fire sequence in EPT Mode (Min = 1).
Detail: Specifies the number of active cycles included in a skip fire sequence when the DI injector is operated
in EPT mode. For example, if the number 4 is entered and
will continuously repeat a seven cycle sequence with four active cycles as long as
enabled for the desired channel. It is also manipulated by the corresponding
the DI-EPT Pulse Generation Tab
104 | ni.com | NI DIDS-2100 Series User Manual
Tab.
SkipFire_DI1_ChnX is enabled for the desired channel. It also manipulates and is
SkipFire_Cycles
windows.
and the other
SkipFire_Cycles and
controls on the DI-EPT Pulse Generation Tab
DI SkipFire_Cycles
DIX Advanced Settings
SkipFire_OnCycle for their assigned
SkipFire_DI1_ChnX
is set to 7, the DI injector
SkipFire_DI1_ChnX
SkipFire_OnCycle
windows.
buttons on the
and the
is
control on