National Instruments NI DIDS-2103 User Manual page 103

Duration Ch1 (msec)
Tip Strip: Duration of injection pulse
Units: msec
Detail: Specifies the time duration of the injection pulse. The ON/OFF button above each
Duration parameter determines whether the pulse will be active or inactive.
Duration Ch1 (CAD)
Tip Strip: Duration of injection pulse
Units: CAD
Detail: This parameter is always disabled, but automatically updated with a calculated value. It is calculated
based on Duration (msec) and
window.
DIX Timing Mode
Tip Strip: Selects timing mode of each injection pulse as Start Of Injection or End Of Injection
Detail: Selector for choosing between Start of Injection "SOI" Mode and End of Injection "EOI" Mode. When
SOI mode is selected, the EOI Timing parameters will be disabled and retain their most recently entered end
of injection angle. When EOI mode is selected, the SOI Timing parameters will be disabled and retain their
most recently entered start of injection angle.
Enable Individual DI1 Channel Duration
Tip Strip: Defines whether the DI Driver module is in uniform or individual mode.
Detail: Activates the individual channel duration controls shown on this screen and also controls the
Individual Channel Duration Indicator
Duration Ch2 and Ch3
Detail: Please see information for channel 1
engine speed shown in the
on the DI-EPT Pulse Generation
EPT Tab of the Engine Position Tracking Setup
Tab.
NI DIDS-2100 Series User Manual | © National Instruments | 103
Timing and
Uniform/