National Instruments NI DIDS-2103 User Manual page 83

Detail: When ON, PFI-LS1 and PFI-LS2 channels are locked together for synchronous operation. This button
is only active when both PFI-LS1 and PFI-LS2 channels are disabled. This rule ensures that LS channels
one and two will be in lock sync when enabled.
Lock PFI-LS3and4
Tip Strip: Lock PFI-LS3&4 Channels. This can only be Enabled when
LS4_ChanEnable buttons are OFF
Detail: Detail: When ON, PFI-LS3 and PFI-LS4 channels are locked together for synchronous operation.
This button is only active when both PFI-LS3 and PFI-LS4 channels are disabled. This rule ensures that LS
channels three and four will be in lock sync when enabled.
PFI-LS1-Source
Tip Strip: Source of lowside PWM command
Detail: Selects the mode of operation for PFI-LS1:
Host Configuration: Allows PWM parameters to be entered directly via this tab
IMV Control: Causes PWM parameters for the associated channel to be sourced from the IMV control
function configured by the
HPV Control: Causes PWM parameters for the associated channel to be sourced from the HPV control
function configured by the
PFI-LS3 Source
Tip Strip: Source of lowside PWM command
Detail: Selects the mode of operation for PFI-LS3:
Host Configuration: Allows PWM parameters to be entered directly via this tab
IMV Control: Causes PWM parameters for the associated channel to be sourced from the IMV control
function configured by the
HPV Control: Causes PWM parameters for the associated channel to be sourced from the HPV control
function configured by the
Rail Pressure Control Setup
Rail Pressure Control Setup
Rail Pressure Control Setup
Rail Pressure Control Setup
PFI-LS3_ChanEnable
window.
window.
window.
window.
NI DIDS-2100 Series User Manual | © National Instruments | 83
and PFI-