Operating Point Table Values
Detail: The table values are shown as a two dimensional array of values, specifying the value to overwrite
each selected
Flex Control Parameter
during each active operating point. Most
Flex Control Parameters
are single-point precision controls which require a single-point precision numeric value. Some
Flex Control
are Boolean controls which require a value of 0 or 1 to represent FALSE or TRUE, respectively.
Parameters
Other
Flex Control Parameters
are mode controls from various system setup windows which have drop-
down text descriptions. The text descriptions should not be entered in these table fields. Instead, the integer
representation should be entered, starting with 0 for the first drop-down selection.
182 | ni.com | NI DIDS-2100 Series User Manual