National Instruments NI DIDS-2103 User Manual page 192

Detail: Specifies the number of samples to plot in the plot area to the right of the window.
Log Data
Tip Strip: Enables logging of selected parameters
Detail: Enables or disables data logging.
Sample Period
Tip Strip: Should be in multiples of 50 msec
Units: msec
Detail: Specifies the time interval for sampling the values of the parameters specified in
Stop Trigger
Tip Strip: Selects the method by which the data logging is stopped or continued if set to None.
Detail:
None: Data logging is started and stopped via
File Size: Data logging is stopped when the file size reaches the value specified by
Number of Samples: Data logging is stopped when the number of logged samples reaches the value
specified by Max Log
The appropriate
Max Log File Size
Units: bytes
Detail: When Stop Trigger
specified by Max Log File
Max Log Samples
Units: samples
Detail: When Stop Trigger
samples reaches the value specified by
192 | ni.com | NI DIDS-2100 Series User Manual
Samples.
Stop Trigger parameter will be shown according to the trigger method selected.
is set to File Size, data logging is stopped when the file size reaches the value
Size.
is set to Number of Samples, data logging is stopped when the number of logged
Log Data.
Max Log Samples.
Variables to Log.
Max Log File Size.