Room Co Transmitter Installation Recommendation; Co Concentration According To Pettenkofer Limit; Conection Of Supply And Exhaust Air Dampers - Salda Smarty 2XV 1.1 Mounting And Installation Instruction

8.1.4. ROOM CO TRANSMITTER INSTALLATION RECOMMENDATION
2
max. 400m
If the duct CO transmitter is used, it must be installed in the extract air duct. To install duct transmitters, hole drilling tools
2
are required .
8.1.5. CO CONCENTRATION ACCORDING TO PETTENKOFER LIMIT
2
8.1.6.

CONECTION OF SUPPLY AND EXHAUST AIR DAMPERS

All versions of Smarty XP can be equipped with outdoor air and exhaust air dampers. Dampers are operated by Open/Close actuators.
Installation diagram
See PIPING AND INSTRUMENTATION DIAGRAM.
Wiring diagram
Automation controller D zone. Upon activation of output X13:3, the dampers open. Upon activation of output X13:4, the dampers close.
28 | EN
2
m
5 0 c
m i n .
min. 60 cm
SMARTY XV v2020.3