Control; Device Control; Device Functions - Salda Smarty 2XV 1.1 Mounting And Installation Instruction

7. CONTROL

7.1.

DEVICE CONTROL

Ventilation unit equipped with miniMCB control board can be controlled with remote controller, WEB interface or mobile app via MB-GATEWAY and
BMS (Building Management System). More information provided in the table below.
With MB-GATEWAY
Web interface
SALDA AIR mobile application
BMS over Modbus TCP/IP
BMS over BACnet TCP/IP
7.2.

DEVICE FUNCTIONS

All miniMCB control boards are run by the same software with all functions included. Full function list and description you can find on the MCB/
miniMCB technical manual. However, operation and control of the device depends on the following factors:
1. Selected control interface (remote control panel, MB-GATEWAY, etc.). The selected interface affects access to the information and settings,
however, it does not affect the logic of control. Full access to the information and settings is available on ST-SA-Control, MB-GATEWAY WEB
application and SALDA AIR mobile application.
2. Unit configuration (internal/external components, sensors and control board settings).
For unit control instructions, refer to the operation manual of the existing control device.
SMARTY XV v2020.3
Remote control panels
Stouch
ST-SA-Control
BMS direct connection
Modbus RTU (RS485)
Wireless communication
MB-GATEWAY + WIFI router
EN | 19