Connection Of Accessories; Fire Protection Signal Input (Fire Protection Input (Nc)); External Co /Pressure Sensors; Room Co Transmitter Installation Recommendation - Salda RIRS H EKO 3.0 Mounting And Installation Instruction

8. CONNECTION OF ACCESSORIES

8.1.

FIRE PROTECTION SIGNAL INPUT (FIRE PROTECTION INPUT (NC))

8.2. EXTERNAL CO
2
Sensors connection:
The CO transmitter is installed in the extract air duct or room.
2
8.3. ROOM CO TRANSMITTER INSTALLATION RECOMMENDATION
2
max. 400m
If the duct CO transmitter is used, it must be installed in the extract air duct. To install duct transmitters, hole drilling tools
2
are required.
RIRS 400-700 H EKO 3.0 v2023.2
/PRESSURE SENSORS
/PRESSURE (input 0-10 VDC) sensors
2
detection.
2
m
5 0 c
m i n .
min. 60 cm
EN | 17