External Co /Pressure Sensors; Room Co2 Transmitter Installation Recommendation; Co2 Concentration According To Pettenkofer Limit - Salda RIS 700 H EKO 3.0 Mounting And Installation Instructions Manual

8.1.2. EXTERNAL CO
2
Sensors connection:
The CO2 transmitter is installed in the extract air duct or room.

8.1.3. ROOM CO2 TRANSMITTER INSTALLATION RECOMMENDATION

max. 400m
If the duct CO2 transmitter is used, it must be installed in the extract air duct. To install duct transmitters, hole drilling tools
are required .

8.1.4. CO2 CONCENTRATION ACCORDING TO PETTENKOFER LIMIT

RIS 700 H EKO 3.0 v2020.1
/PRESSURE SENSORS
m
5 0 c
m i n .
min. 60 cm
EN | 19