Paging The System; Paging Zones - 3Com 3100 User Manual

88 C 6: G
HAPTER ETTING

Paging the System

Paging Zones

M Y T
ORE FROM OUR ELEPHONE
When you page the system, you broadcast a message to all internal
extensions with speakers, to a Public Address (PA) system, or to both
simultaneously. Paging codes, as described in
for each destination.
Table 6 Paging Codes
Feature
External Paging
Broadcast an announcement over a
public address system that has a
paging amplifier and speaker system
that is connected to your NBX system
Internal Paging
Broadcast an announcement through
the speakers on all NBX Telephones
with speakers on your system except
those that have been set to Do Not
Disturb.
Simultaneous Paging
Broadcast an announcement externally
and internally at the same time.
To page, perform the following steps using your 3Com Telephone:
1 Pick up the handset.
2 Dial the appropriate paging code on your system.
3 Speak the broadcast message into your handset and hang up.
A page zone is a subset of internal extensions to which you can direct a
broadcast using a configured extension. You can page a zone, a P.A.
system, or both the zone and the P.A. system simultaneously. Zone
extensions are configured by the administrator.
To discover the page zone extensions on your system:
1 Log in to the NBX NetSet Utility and go to System Group Settings >
Page Zones.
The NBX NetSet utility lists the existing page zones and their extension
numbers.
2 Click the page zone extension to list the members of that zone.
S
YSTEM
3-digit dial plan
(default codes)
620
621
622
Table 6, have default values
4-digit dial plan
(default codes)
6200
6201
6202