Routing Cables; Routing Cables From The Top - Huawei UPS5000-E FM Series User Manual

UPS5000-E-(30 kVA-120 kVA)-FM
User Manual
Figure 3-21 Preparing a cable terminal outside the cabinet
Choose an appropriate cabling route based on the actual situation. The figure is for reference
only.
Step 4 Connect the cable with a crimped terminal to the corresponding copper bar.
Step 5 Clean foreign matter inside the cabinet.
----End

3.2.5 Routing Cables

3.2.5.1 Routing Cables from the Top

Context
● Before connecting cables, ensure that the switches inside the UPS, the
● Route cables for the UPS from inside out and from bottom up.
Procedure
Step 1 Ensure the maintenance bypass switch is OFF. Open the front door, remove the
front cover, and remove covers from the top of the cabinet based on the site
requirements.
Issue 02 (2020-11-10)
NO TE
NO TICE
upstream input switch and battery string switch are OFF to prevent operations
with power on.
Copyright © Huawei Technologies Co., Ltd.
3 Installation
64