Huawei UPS5000-E FM Series User Manual page 100

UPS5000-E-(30 kVA-120 kVA)-FM
User Manual
Table 4-7 Battery status
Item
Battery Status
Voltage (V)
Current (A)
Temperature (°C) (only for
lead-acid batteries)
Backup time (min)
Remaining cap. (%)
SOH
Maximum Cell
Temperature (°C) (only for
lithium batteries)
Min Cell Temperature (°C)
(only for lithium batteries)
Table 4-8 Total runtime
Item
Bypass runtime (h)
Inv. runtime (h)
Issue 02 (2020-11-10)
NO TE
The value must be an integer. For example:
● If the value is less than 1, the value takes 0.
● If the value is greater than or equal to 1 and less than 2, the value takes 1.
Copyright © Huawei Technologies Co., Ltd.
Description
Lead-acid battery: The value can be Not
connected, Equalized charging, Float charging,
Hibernating, discharging, or Not chg. or dis.
Lithium battery: The value can be Not connected,
Float charging, discharging, or Not chg. or dis.
Voltage of the battery string.
Current of the battery string (the current is +
when batteries are being charged and – when
discharged).
Battery operating temperature (A battery sensor is
required. If the sensor is not installed, N/A is
displayed).
Battery backup time estimated at the current load.
Remaining battery capacity.
State of health.
-
-
Description
Time for which the UPS runs in bypass mode.
Time for which the UPS runs in inverter mode.
4 User Interface
92