Huawei UPS5000-E FM Series User Manual page 110

UPS5000-E-(30 kVA-120 kVA)-FM
User Manual
Item
ModbusTCP
SNMP
ModbusRTU
Issue 02 (2020-11-10)
Description
Refers to an Ethernet-based
Modbus protocol used to
connect to the NetEco.
Disable: The Modbus TCP
services are unavailable.
Read-only: Only the read
permission is enabled. Settings
are not allowed.
NetEco: The read permission
and the write permission on
related parameters supported
by the NetEco are enabled.
Enable: All functions are
available.
Refers to the Simple Network
Management Protocol used to
connect to the NetEco.
Disable: The SNMP services
are unavailable.
Read-only: Only the read
permission is enabled. Settings
are not allowed.
NetEco: The read permission
and the write permission on
related parameters supported
by the NetEco are enabled.
Enable: All functions are
available.
Refers to a Modbus protocol
based on the RS485 bus,
which is used to connect to
the NetEco.
Disable: The Modbus RTU
services are unavailable.
Read-only: Only the read
permission is enabled. Settings
are not allowed.
NetEco: The read permission
and the write permission on
related parameters supported
by the NetEco are enabled.
Enable: All functions are
available.
Copyright © Huawei Technologies Co., Ltd.
4 User Interface
Default Value Range
Value
Enable Disable,
Enable, Read-
only, NetEco
Enable Disable,
Enable, Read-
only, NetEco
Enable Disable,
Enable, Read-
only, NetEco
102