Routing Power Cables - Huawei UPS5000-E-180 kVA User Manual

UPS5000-E-180 kVA
User Manual (Integrated UPS, 30 kVA Power
Modules)
Step 5 Clean foreign matter inside the cabinet.
----End

4.2.5 Routing Power Cables

Context
● Install cables for the UPS from inside out and from bottom up.
● When connecting mains input power cables, cut corrugated pipes into a proper
length based on the stripping length of the outer protective layer of the five-
core cable. Use a corrugated pipe to cover each cable, and use insulation tape
to secure both ends of the corrugated pipe to prevent it from sliding.
Procedure
Step 1 Remove the six rodent-proof meshes and cable hole protection panels from the
top of the cabinet.
Figure 4-21 Removing rodent-proof meshes
Issue 05 (2024-01-30)
NO TICE
NO TE
You can drill holes into the removed covers as required before reinstalling them on the
cabinet.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation and Cable Connection
79