Epson RC620 Safety And Installation page 64

2. Installation
G3 : Multiple Mounting
■
WARNING
■ When installing the Manipulator to the wall, support the
(1) Unpack the manipulator with
(2) Secure the base to the wall with
NOTE
(3) Remove the shipping bolt and
52
Install the Multiple Mounting Manipulator with two or more people.
The Manipulator weights are as follows. Be careful not to get hands,
fingers, or feet caught and/or have equipment damaged by a fall of
the Manipulator.
G3-301*M : approx. 14 kg: 31 lb.
G3-351*M : approx. 14 kg: 31 lb.
Manipulator, and then secure the anchor bolts.
support without securing the anchor bolts properly is extremely
hazardous and may result in fall of the Manipulator.
retaining the arm posture.
four bolts.
Use bolts with specifications
conforming to ISO898-1 Property
Class: 10.9 or 12.9.
jigs.
Screw Hole
(depth 20 mm or more)
RC620 Safety and Installation Rev.8
Removing the
10 mm
Plane Washer
Spring Washer
4-M8×30