Epson RC620 Safety And Installation page 32

1. Safety
Location
D
E
F
20
Label
You can catch your hand or fingers
between the shaft and cover when
bringing your hand close to moving
parts.
Manipulators with bellows do not have
this label for no danger of your hand or
fingers being caught
Be careful of the arm falling due to the
arm's own weight while the brake
release button is being pressed.
* This label is attached to the option
brake release box.
Be careful of the shaft falling due to the
hand's own weight while the brake
release button is being pressed.
Do not lift without the shipping bracket.
To pick up the manipulator arm, use two
wire ropes of equal length.
Remove the shipping brackets and
eyebolts before turning power on.
Follow the directions in this manual for
installation and transportation.
RC620 Safety and Installation Rev.8
Note