Automatic Windows 7 Stakmax Driver Installation - Molecular Devices StakMax User Manual

5016072 A

Automatic Windows 7 StakMax Driver Installation

If you are using a computer running Windows 7, after the StakMax
Software USB cable is connected and the new hardware is recognized,
the driver automatically installs.
Note: In the event that you need to find the driver files, the
StakMax.inf and StakMax64.inf driver files are located in the
C:\Program Files\Molecular Devices\SoftMaxPro 6.1 folder.
To verify the driver installation
1. Go to Device Manager > Ports (COM & LPT) > Stacker
(COM#).
Figure 2-49 Locating the StakMax USB driver.
2. If this is the first time connecting your StakMax, you must now
align the StakMax gripper. See
page 58.
StakMax Microplate Handling System User Guide
Aligning the StakMax Gripper on
57