Molecular Devices StakMax User Manual page 118

Scripting
118
The new command is inserted after the selected command. In
the example script, notice that the Record Barcode command
was inserted after the Select Next Plate Section command.
See Figure 4-8.
Figure 4-8 Command script after a new command is inserted.
4. Repeat Step 1
been added.
5. If you do not want to make any further changes to the command
script, go to Saving Scripts on page
OR
If you want to remove or change the order of the commands, go
to Removing Commands on page 119
Commands on page
through Step 3 until all new commands have
121.
125.
or Changing the Order of
5016072 A