Chapter 2 Installation And Set Up - Molecular Devices StakMax User Manual

Installation and Set Up
Installing the StakMax
equipment and attaching it to a microplate instrument. Setting up the
StakMax microplate handler involves installing the StakMax USB driver
and aligning the microplate handler drawer with the StakMax
microplate gripper.
Note: The StakMax USB driver enables the StakMax Software, which
is installed with the SoftMax
This section contains the following topics:
5016072 A
®
• Unpacking the System on page 15
• Connecting the Baseplate on page 17
• Installing or Replacing a Barcode Reader on page 47
• Installing the StakMax Driver on page 49
• Aligning the StakMax Gripper on page 58
• Performing a Gripper Functional Check on page 78
microplate handler involves unpacking the
Pro Software version 6.1 (or later).
®
2
13