Use; Installing The Batteries; Turning The Clamp-On Meter On; Turning The Clamp-On Meter Off - AEMC 405 User Manual

Find Quality Products Online at:
3.1

INSTALLING THE BATTERIES

Insert the batteries supplied with the device as follows:
1. Using a screwdriver, unscrew the battery compartment cover (item 1)
from the back of the housing.
2. Insert the 4x1.5V AA batteries supplied (item 2), observing polarities.
3. Close the battery compartment cover and screw it onto the housing.
1
Figure 6 : The Battery Compartment
3.2

TURNING THE CLAMP-ON METER ON


With the rotary switch set in the OFF position, turn the switch to the desired
function. The display lights (all symbols) for a few seconds (see §1.3), then
the screen of the function chosen is displayed.

The clamp-on meter is now ready to make measurements.
3.3

TURNING THE CLAMP-ON METER OFF

The clamp-on meter can be turned off in two ways:

Manually - Turn the switch to the OFF position.

Automatically - After ten minutes with no activity, the instrument will turn
OFF. Thirty (30) seconds before the device is switched off, an audible
signal sounds intermittently. To re-activate the device, press any button or
turn the rotary switch.
GlobalTestSupply
www.

3 USE

2
20
.com
sales@GlobalTestSupply.com