Programme settings
Programme
blocks
100
Wash block sequence is predefined and is the same as in the
programme chart (see "Programme chart").
-
Pre-wash 1
to
3
Pre-washing removes coarse soiling and foaming agents.
Main wash 1
2
-
and
Depending on wash load cleaning generally occurs at temperatures
between 50 °C and 85 °C with the addition of appropriate cleaning
agent.
Interim rinse 1
4
-
to
In the interim rinse stages the chemical agents from the previous
wash blocks are rinsed away and neutralised where necessary by
the addition of neutralising agents.
Final rinse 1
2
-
to
To avoid deposits on the wash load demineralised (AD) water
should preferably be used if available for the final rinse.
Drying
-
Adequate drying reduces residual moisture on the load.