Table of Contents
Advertisement
5. Starting the calibration
programme
For optimum water and energy
consumption and excellent wash
results, it is important to calibrate the
washing machine.
To do this, the Cottons programme
must be run without laundry and
without detergent.
No other programmes can be started
until calibration has been carried out.
The following message appears in the
display:
Open and run "Cottons 90°C" without
laundry.
Touch the sensor control until the
OK sensor control lights up and
confirm with OK.
90°
1400
Open the stopcock.
Touch the Start/Add laundry sensor
control.
The calibration programme then starts.
It will take approximately 2 hours.
Before using for the first time
At the end of the programme, the
following message will appear in the
display:
Take hold of the door and pull it
Tip: Leave the door slightly open to
allow the drum to dry.
Turn the programme selector to the
1:55
OK
Set up complete
open.
position.
23
Advertisement
Table of Contents
