Operation; Selecting A Programme; Starting A Programme; Starting A Programme Using Delay Start - Miele PG 8583 CD Operating Instructions Manual

Operation

Programme
selection buttons
Programme list
Starting a
programme using
delay start
54

Selecting a programme

Select a programme using programme selection buttons ,

 or .
Press the  button and

use the  and  arrow buttons to highlight a programme and

confirm your selection with OK.
The LED in the button selected lights up and the relevant programme
appears in the display. The LED in the Start/Stop button also starts to
flash.
Another programme can be selected at any time before a programme
has started. Once it has started, programme selection is locked.
The different programmes and their uses are described in
"Programme chart" at the end of these operating instructions.
Always select the programme depending on the type of load and
degree and type of soiling, or on infection prevention issues.

Starting a programme

Close the door.

When the door is closed, the LED in the  button will light up.
Press the Start/Stop button.

The LED in the Start/Stop button will light up constantly and the
LED in the  button will go out.
The start of a programme can be delayed (to benefit from economy
rates of electricity, for example, or to clean the wash cabinet before it
is used the next day). Starting from the programmed time, a delay
start time between 1 minute and 24 hours can be selected in one-
minute increments (see "Settings /Time of day").
Delay start must be switched on (see "Settings /Delay start").
If soiling is left to dry on the load for longer, the reprocessing result
can be adversely affected. There is also a risk of corrosion for
stainless steel items.
Universal
Temperature
75 °C
Duration
1:30 h