Miele PG 8583 CD Operating Instructions Manual page 28

Commissioning
Commissioning
completed
Fault 420
28
Commissioning is completed when the following message is
displayed.
Confirm the message with OK.

The washer-disinfector is now ready for use.
The settings made during the commissioning process are only
adopted after a complete programme has been run.
Select any programme, e.g.:

Press the Start/Stop button to start the programme.

After commissioning, every programme starts with reactivation of
the water softener.
If the programme is cancelled using
plumbing connections are deactivated.
Confirm the error message with OK.

Switch the machine off using the  button.

Wait approximately 10 seconds before switching the machine on

again with the  button.
The commissioning procedure starts again.
Perform commissioning and activate at least one plumbing

connection; e.g. for cold water.
Set up successful
Universal
Temperature
75 °C
Duration
1:30
Drain .
Fault 420
h
, this means that all the