Water Inlet And Drainage - Miele PG 8583 CD Operating Instructions Manual

Water inlet and drainage

Problem
Check water inlet
Check drainage
Cause and remedy
One or more stopcocks are closed.
Open the stopcocks.

There was insufficient water in the machine.
Clean the water intake filters.

Open the stopcocks fully.

The supply pressure at the water connection is too low.
Refer to the specifications for supply pressure in the

"Technical data".
Contact a suitably qualified installer.

A programme was cancelled because the water in the
wash cabinet is only being pumped away slowly or not at
all.
- The drain hose is blocked.
Remove any kinks or large loops in the drain hose.

Start the programme again.

- The filters in the wash cabinet are blocked.
Clean the filters in the wash cabinet.

 Danger of injury from glass shards, needles, etc.
retained in the filters.
Start the programme again.

- The drain pump or the non-return valve is blocked.
Clean the access to the drain pump and the non-return

valve.
Start the programme again.

- The drainage system cannot take in enough water
because it is blocked.
Contact a suitably qualified plumber.

Problem solving guide
147