Toro Workman 3000 Series Service Manual page 122

27.Install differential gear assembly (Item 1) together
with fork shaft (Item 2) onto transaxle case.
28.Install side cover:
A. Insert 2 dowel pins onto transaxle case.
B. Apply silicone sealant onto mating surface of side
cover.
C. Install side cover. Tighten cap screws to a torque
from 18.5 to 22 ft–lb (24.5 to 29.5 N–m).
29.Install R.H. axle shaft assembly:
A. Apply silicone sealant onto mating surface of seal
cover.
B. Install axle shaft assembly (Item 2) and tighten
cap screws (Item 1) to a torque from 18.5 to 22 ft–lb
(24.5 to 29.5 N–m).
Drive Train
1
2
Page 6 – 50
Figure 104
1
Figure 105
Figure 106
Figure 107
Workman 3000/4000 Series
2