Toro Workman 3000 Series Service Manual page 116

13.Assemble shift arms:
A. Install 3 new oil seals (Item 14) onto transaxle
case. Apply multi–purpose grease on lips of oil seals
before installing.
B. Install 3 keeper plates (Item 13) and tighten 3 cap
screws (Item 12) to a torque from 11 to 13 ft–lb (15 to
17 N–m).
C. Apply Loctite #680 (or equivalent) to threads and
tapers of shift fork arms.
D. Install 2 shift arms (Item 11). Install shift arm as-
sembly (Items 8, 7, 6, 5, 4, 3).
E. Install washers (Items 10 and 2) and locknuts
(Items 9 and 1). Tighten shift arm retaining locknuts
to a torque from 200 to 280 in–lb (22.6 to 31.6 N–m).
14.Install oil cap (Item 1) with O–ring. Apply multi–pur-
pose grease to O–ring.
15.If removed, install air breather (Item 2). Use sealing
tape on threads of air breather.
Drive Train
200 to 280 in–lb
(22.6 to 31.6 N–m)
Apply Loctite 680
to threads and tapers
14
1
Page 6 – 44
1
200 to 280 in–lb
2
(22.6 to 31.6 N–m)
4 8
7
6
5
3
9
10
11
Figure 85
12
13
Figure 86
2
Figure 87
Workman 3000/4000 Series
9
10
11