Diagnostics And System Data - quadient IX-3 User Manual

11.3

Diagnostics and System Data

Diagnostics
You can gain access to all the diagnostic data listed below:
No. Diagnostic
1 Base Sensors
2 Display
3 Keypad
4 USB ports
5 Serial Connectors
6 Base Status
7 Ping Server
8 Test Server
9 Ping Tool
10 IP Configuration Checker
11 IP Config
Comments
Reports the status ([0] or [1]) of the sensors below:
• Top doc
• Start print
• Cover
• Carriage
The screen displays, successively, a black bar without
text, then a text.
Displays "Key ok" if the test is correct
Checks the two USB ports (need USB keys).
Checks the serial port.
Check status of the base life cycle
Sends a message to a server (if connected) to check
the line.
Sends a message to a server to test the line.
Checks Lan address.
Checks Lan connection.
Displays current parameters related to IP Configura-
tion.
11
167