To Check The Gpib - Keysight Technologies E4981A Service Manual

b. Click "Programs" and "MS-DOS Prompt" (or "Command Prompt") to open the DOS
(Command) Prompt window.
c. Type a ping command followed by the E4981A IP address as "ping xxx.xxx.xxx.xxx"
(where, xxx.xxx.xxx.xxx is the IP address such as 192.168.0.1 assigned in step 3-d.)
Press [Enter] key on the keyboard.
d. The external computer displays a message of ping command response from the
E4981A.
packet size, and a response time counted by the computer. The ping command is
repeated 4 times.
Figure 4-7 Example of normal ping command test result
If the E4981A doesn't return the response, the external computer displays a message of
"Request timed out" as shown in
suspected.
Figure 4-8 Example of no response for ping command

To Check the GPIB

Procedure
Perform the E4981A performance test program. If the controller cannot detect the E4981A,
the problem seems in the PPMC PCA or the connection of the GPIB cable.
Chapter 4
Figure 4-7 shows an example of normal result that indicates the IP address,
Figure
Function Specific Troubleshooting
4-8. In this case, a failure in the PPMC PCA is
Troubleshooting
59