Replacing Fuse; Fuse Selection; Setting Up The Fuse - Keysight Technologies E4981A Service Manual

Power Requirement

Replacing Fuse

Replacing Fuse

Fuse Selection

Select proper fuse according to the
Table C-1
Use the fuse that meets the following specifications.
UL/CSA type, Slo-Blo, 5x20mm miniature fuse, 3A 250V (part number: 2110-1017)
Spare fuses are available from Keysight Technologies sales office. To check or replace the
fuse, disconnect the power cable and pull out the fuse holder (refer to
you (refer to
Figure C-1 Fuse holder and power cable socket
Figure C-2 Removing the fuse
138
Fuse Selection
Fuse Rating/Type
3A 250Vac
UL/CSA type
Time Delay

Setting up the fuse

Figure C-2).
Power cable receptacle
Fuse holder
Table C-1.
Fuse Part Number
2110-1017
USE ONLY WITH A 250V FUSE
Figure C-1) towards
Appendix C