Optical Ila Management Cable Specifications And Pinouts; Cable Specifications For Console And Management Connections For The Optical Ila - Juniper PTX3000 Hardware Manual

Table 18: Optical Specifications (continued)
Parameter
Signal output power
range
Gain range (standard)
Gain range (extended)
RELATED DOCUMENTATION
Connecting the Optical ILA Grounding Cable | 62
Unpacking and Mounting the Optical ILA | 54
Optical ILA Management Cable Specifications and
Pinouts
IN THIS SECTION

Cable Specifications for Console and Management Connections for the Optical ILA | 49

Management Port Connector Pinouts for the Optical ILA | 50
Console Port Connector Pinouts for the Optical ILA | 51
Cable Specifications for Console and Management Connections for the
Optical ILA
Table 19 on page 50 lists the specifications for the cables that connect the optical ILA to a management
device.
Configurations
Loaded system (96 channels)
Single channel
Output gain tilt equal to 0 dB
Output gain tilt not equal to
0
Minimum
10 dB
30 dB
Maximum
19.8 dBm
0 dBm
30 dB
35 dB
49