Juniper PTX3000 Hardware Manual page 110

Table 32: Alarm Descriptions (continued)
Alarm Name
edfaEbaOutputLOS
edfaEbaCaliTblerr
oscaAddPowerLOS
oscaDropPowerLOS
oscbAddPowerLOS
oscbDropPowerLOS
RELATED DOCUMENTATION
Chassis Status LEDs on an Optical ILA | 25
Management Port LEDs on the Optical ILA | 28
Optical ILA Power Supply LEDs | 34
Description
EDFA E-ba output power alarm. If the
input power is within 1.5 dB of the
threshold for the minimum output
power, an alarm is triggered.
E-ba is the B to A direction (for
example, west to east).
E-ba calibration table error.
The alarm is triggered if the add
power value is within 1.5 dB from
OSC minimum add power threshold
value.
The alarm is triggered if the drop
power value is within 1.5 dB from the
OSC minimum drop power threshold
value.
The alarm is triggered if the add
power value is within 1.5 dB from the
OSC minimum add power threshold.
The alarm is triggered if the drop
power value is within 1.5 dB from the
OSC minimum drop power threshold
value.
Corrective Action
When the output power is at least
1.5 dB greater than the threshold
value, the alarm is cleared.
Return the device by using an RMA.
The alarm is cleared when the add
power is at least 1.5 dB greater than
the threshold value.
The alarm is cleared when the drop
power is at least 1.5 dB greater than
the threshold value.
The alarm is cleared when the add
power is at least 1.5 dB greater than
the threshold value.
The alarm is cleared when the drop
power is at least 1.5 dB greater than
the threshold value.
110