Juniper PTX3000 Hardware Manual page 27

Figure 9: Optical ILA Management Panel Components
1 RJ-45 console port (CON) to support RS-232 serial
—
ports.
2 RJ-45 (1000BASE-T) management Ethernet port
—
(MGMT).
You manage the optical ILA by using the command-line interface (CLI), which is accessible through the
console and out-of-band management ports on the management panel. In addition, the front panel has
system status LEDs (see Table 4 in
or major alarms or other issues with the amplifier.
detail.
You can also manage the optical ILA through Connectivity Services Director (CSD), which is a Junos Space
application developed to manage the optical functionality provided by optical ILAs and integrated photonic
line cards (IPLCs) that are installed in the PTX3000 routers. CSD is managed over a data communications
network (DCN). CSD presents a topological network view in an intuitive, comprehensive, and cohesive
manner that enables you to visualize optical sites, links, and services and a site view that provides status,
configuration, alarms/faults, and performance monitoring functionality on the optical interfaces. By using
CSD, you can perform the following tasks on an optical ILA:
View the optical interface specifications that are currently applied on the device, such as wavelength
and power.
Modify the existing parameters of the optical port to suit your network needs or resolve any alarms
caused by certain interface settings.
View the active alarms generated for the optical interface to analyze and resolve the condition that
triggered the alarm on the device.
Configure threshold crossing alarms (TCAs) for the optical interface.
View the performance monitoring details in statistical and graphical formats for the optical interface.
NOTE: See the Connectivity Services Director User Guide for more information.
3 USB port (USB). Debug only.
—
4 USB port (USB). Debug only.
—
"Optical ILA Chassis Status LEDs" on page
Figure 9 on page 27
24) that alert you to minor
shows the management panel in
27