controlled via network.
For details of Pr.180 to Pr.189, Pr.338, and Pr.339, refer to the FR-E800 Instruction Manual (Function).
*2
The signals are fixed. They cannot be changed using parameters.
*3
While "1" is set in the frequency setting command (RYD), the set frequency (RWw1) is always applied.
*4
If "1" is set in these registers at the same time while Pr.544 = "0", only one of these is executed.
*5
Refer to
page 43
for operation conditions of inverter reset.
*6
Torque control cannot be performed with a PM motor.
DETAILS OF INPUT AND OUTPUT SIGNALS
7
63